Main Pages

Our normal business hours are Monday - Friday 8am - 4.45pm, Saturday 8.30am - 11.45am

Fax: 01274 220330
Tel: 01274 200320
email: sales@sissling-group.co.uk

20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
Best Selling Products
D005SNG Smove Door Buffer Lightweight (Handle Side)
A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.

50mm x 10mm dia

For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
find out more

D045XXG/16 Plastic Spacer For Smove GREY
A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
find out more

F1C169 Sliding Door Hinge

find out more

DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.

The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.

In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.

This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more

F1PXAY Sliding Door Block

find out more

C2AFA99 Sprung Hinge 0mm Crank 165d Full Overlay
A standard sprung hinge compatible with all .

Allows a cupboard door to open 165degrees.

Mounting Plates Are NOT Included And Must Be Ordered Seperately

find out more

Online Catalogue | Door Buffers and Catches

Door Buffers and Catches
Online Catalogue | Door Buffers and Catches

For illustrative purposes only.
DP3SNG PUSH Basic Release Catch GREY
Ref: S05DP3SNG
Price: (24 or fewer) £3.02 Each (£3.62 Inc' VAT at 20%)
Price: (25 to 49) £2.72 Each (£3.26 Inc' VAT at 20%)
Price: (50 to 99) £2.57 Each (£3.08 Inc' VAT at 20%)
Price: (100 to 299) £2.42 Each (£2.90 Inc' VAT at 20%)
Price: (300 to 599) £2.27 Each (£2.72 Inc' VAT at 20%)
Price: (600 or more) £2.11 Each (£2.53 Inc' VAT at 20%)
Quantity:

A basic PUSH catch without adjustment, supplied complete with screws and cover cap.

Keep Retaining plate DP29SNG or DP29SNGR required and must be ordered seperately.
People who bought this item also bought:
1. DP4SNG PUSH Adjustable Release Catch GREY (Ref: S05DP4SNG)
2. DP29SNG PUSH Knock-In Keep Plate GREY (Ref: S05DP29SNG)
3. C2APA99 PUSH Hinge 0mm Crank 110d Full Overlay (Ref: S05C2APA99)

For illustrative purposes only.
DP29SNG PUSH Knock-In Keep Plate GREY
Ref: S05DP29SNG
Price: (24 or fewer) £0.48 Each (£0.58 Inc' VAT at 20%)
Price: (25 to 49) £0.43 Each (£0.52 Inc' VAT at 20%)
Price: (50 to 99) £0.41 Each (£0.49 Inc' VAT at 20%)
Price: (100 to 299) £0.38 Each (£0.46 Inc' VAT at 20%)
Price: (300 to 599) £0.36 Each (£0.43 Inc' VAT at 20%)
Price: (600 or more) £0.34 Each (£0.41 Inc' VAT at 20%)
Quantity:

Can used with either DP4SNG or DP3SNG catches.

A knock-in push fit in to a 26mm diameter x 8mm deep hole
People who bought this item also bought:
1. DP4SNG PUSH Adjustable Release Catch GREY (Ref: S05DP4SNG)
2. DP3SNG PUSH Basic Release Catch GREY (Ref: S05DP3SNG)
3. C2APA99 PUSH Hinge 0mm Crank 110d Full Overlay (Ref: S05C2APA99)

For illustrative purposes only.
D045XXG/16 Plastic Spacer For Smove GREY
Ref: S05D045XXG/16
Price: (24 or fewer) £0.75 Each (£0.90 Inc' VAT at 20%)
Price: (25 to 49) £0.68 Each (£0.82 Inc' VAT at 20%)
Price: (50 to 99) £0.64 Each (£0.77 Inc' VAT at 20%)
Price: (100 to 249) £0.60 Each (£0.72 Inc' VAT at 20%)
Price: (250 to 499) £0.56 Each (£0.67 Inc' VAT at 20%)
Price: (500 or more) £0.53 Each (£0.64 Inc' VAT at 20%)
Quantity:

A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
People who bought this item also bought:
1. D005SNG Smove Door Buffer Lightweight (Handle Side) (Ref: S05D005SNG)
2. S2BX83H9 Symmetrical Steel Screw Cover (Ref: S05S2BX83H9)
3. D076SN9 Smove Housing - Diecast Metal (Ref: S05D076SN9)

For illustrative purposes only.
D005SNG Smove Door Buffer Lightweight (Handle Side)
Ref: S05D005SNG
Price: (24 or fewer) £1.90 Each (£2.28 Inc' VAT at 20%)
Price: (25 to 49) £1.71 Each (£2.05 Inc' VAT at 20%)
Price: (50 to 99) £1.62 Each (£1.94 Inc' VAT at 20%)
Price: (100 to 249) £1.52 Each (£1.82 Inc' VAT at 20%)
Price: (250 to 499) £1.43 Each (£1.72 Inc' VAT at 20%)
Price: (500 or more) £1.33 Each (£1.60 Inc' VAT at 20%)
Quantity:

A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.

50mm x 10mm dia

For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
People who bought this item also bought:
1. D045XXG/16 Plastic Spacer For Smove GREY (Ref: S05D045XXG/16)
2. S2BX83H9 Symmetrical Steel Screw Cover (Ref: S05S2BX83H9)
3. D076SN9 Smove Housing - Diecast Metal (Ref: S05D076SN9)

For illustrative purposes only.
D006SNG Smove Buffer Medium Weight (Centre Fix)
Ref: S05D006SNG
Price: (24 or fewer) £1.90 Each (£2.28 Inc' VAT at 20%)
Price: (25 to 49) £1.71 Each (£2.05 Inc' VAT at 20%)
Price: (50 to 99) £1.62 Each (£1.94 Inc' VAT at 20%)
Price: (100 to 249) £1.52 Each (£1.82 Inc' VAT at 20%)
Price: (250 to 499) £1.43 Each (£1.72 Inc' VAT at 20%)
Price: (500 or more) £1.33 Each (£1.60 Inc' VAT at 20%)
Quantity:

A soft close door buffer, the Smove D006 is inserted into the centre of the cabinet front.

50mm x 10mm dia

Two Smove are recommended for doors over 1600mm height, on at the top and one at the bottom of the door.

For illustrative purposes only.
D008SNG Smove Door Buffer Heavyweight (Hinge Corner)
Ref: S05D008SNG
Price: (24 or fewer) £1.90 Each (£2.28 Inc' VAT at 20%)
Price: (25 to 49) £1.71 Each (£2.05 Inc' VAT at 20%)
Price: (50 to 99) £1.62 Each (£1.94 Inc' VAT at 20%)
Price: (100 to 249) £1.52 Each (£1.82 Inc' VAT at 20%)
Price: (250 to 499) £1.43 Each (£1.72 Inc' VAT at 20%)
Price: (500 or more) £1.33 Each (£1.60 Inc' VAT at 20%)
Quantity:

A soft close door buffer, the Smove D008 is inserted into the top or base panel of the cabinet on the hinged side, a distance of 27mm from the cabinet side is suggested.

50mm x 10mm dia

Two Smove are recommended for doors over 1600mm height, one at the top and one at the bottom of the door.
People who bought this item also bought:
1. D086SNG Smove Housing - S/Adhesive Grey (Ref: S05D086SNG)

For illustrative purposes only.
D086SNG Smove Housing - S/Adhesive Grey
Ref: S05D086SNG
Price: (24 or fewer) £0.80 Each (£0.96 Inc' VAT at 20%)
Price: (25 to 49) £0.72 Each (£0.86 Inc' VAT at 20%)
Price: (50 to 99) £0.68 Each (£0.82 Inc' VAT at 20%)
Price: (100 to 249) £0.64 Each (£0.77 Inc' VAT at 20%)
Price: (250 to 499) £0.60 Each (£0.72 Inc' VAT at 20%)
Price: (500 or more) £0.56 Each (£0.67 Inc' VAT at 20%)
Quantity:

Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
People who bought this item also bought:
1. D008SNG Smove Door Buffer Heavyweight (Hinge Corner) (Ref: S05D008SNG)

For illustrative purposes only.
DP80SNGR PUSH Mag Basic Housing GREY
Ref: S05DP80SNGR
Price: (24 or fewer) £0.27 Each (£0.32 Inc' VAT at 20%)
Price: (25 to 49) £0.24 Each (£0.29 Inc' VAT at 20%)
Price: (50 to 99) £0.23 Each (£0.28 Inc' VAT at 20%)
Price: (100 to 249) £0.22 Each (£0.26 Inc' VAT at 20%)
Price: (250 to 499) £0.20 Each (£0.24 Inc' VAT at 20%)
Price: (500 or more) £0.19 Each (£0.23 Inc' VAT at 20%)
Quantity:

Basic housing for the DPMG289 magnetic push to open door buffer
People who bought this item also bought:
1. D076SN9 Smove Housing - Diecast Metal (Ref: S05D076SN9)
2. D005SNG Smove Door Buffer Lightweight (Handle Side) (Ref: S05D005SNG)
3. D045XXG/16 Plastic Spacer For Smove GREY (Ref: S05D045XXG/16)

For illustrative purposes only.
D076SN9 Smove Housing - Diecast Metal
Ref: S05D076SN9
Price: (24 or fewer) £0.55 Each (£0.66 Inc' VAT at 20%)
Price: (25 to 49) £0.50 Each (£0.60 Inc' VAT at 20%)
Price: (50 to 99) £0.47 Each (£0.56 Inc' VAT at 20%)
Price: (100 to 249) £0.44 Each (£0.53 Inc' VAT at 20%)
Price: (250 to 499) £0.41 Each (£0.49 Inc' VAT at 20%)
Price: (500 or more) £0.39 Each (£0.47 Inc' VAT at 20%)
Quantity:

Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
People who bought this item also bought:
1. D045XXG/16 Plastic Spacer For Smove GREY (Ref: S05D045XXG/16)
2. D005SNG Smove Door Buffer Lightweight (Handle Side) (Ref: S05D005SNG)
3. S2BX83H9 Symmetrical Steel Screw Cover (Ref: S05S2BX83H9)

For illustrative purposes only.
DP82SNGR PUSH Mag Adjustable Housing GREY
Ref: S05DP82SNGR
Price: (24 or fewer) £0.63 Each (£0.76 Inc' VAT at 20%)
Price: (25 to 49) £0.57 Each (£0.68 Inc' VAT at 20%)
Price: (50 to 99) £0.54 Each (£0.65 Inc' VAT at 20%)
Price: (100 to 249) £0.50 Each (£0.60 Inc' VAT at 20%)
Price: (250 to 499) £0.47 Each (£0.56 Inc' VAT at 20%)
Price: (500 or more) £0.44 Each (£0.53 Inc' VAT at 20%)
Quantity:

Adjustable housing for the DPMG289 magnetic door buffer

Related products:
1. S2BX83H9 Symmetrical Steel Screw Cover (Ref: S05S2BX83H9)

For illustrative purposes only.
S2BX83H9 Symmetrical Steel Screw Cover
Ref: S05S2BX83H9
Price: (24 or fewer) £0.08 Each (£0.10 Inc' VAT at 20%)
Price: (25 to 49) £0.07 Each (£0.08 Inc' VAT at 20%)
Price: (50 to 99) £0.07 Each (£0.08 Inc' VAT at 20%)
Price: (100 to 249) £0.06 Each (£0.07 Inc' VAT at 20%)
Price: (250 to 499) £0.06 Each (£0.07 Inc' VAT at 20%)
Price: (500 or more) £0.06 Each (£0.07 Inc' VAT at 20%)
Quantity:

Hides the hinge screw and gives projects a neatly finished impression.
People who bought this item also bought:
1. D045XXG/16 Plastic Spacer For Smove GREY (Ref: S05D045XXG/16)
2. D005SNG Smove Door Buffer Lightweight (Handle Side) (Ref: S05D005SNG)
3. D076SN9 Smove Housing - Diecast Metal (Ref: S05D076SN9)

For illustrative purposes only.
DP4SNG PUSH Adjustable Release Catch GREY
Ref: S05DP4SNG
Price: (24 or fewer) £3.02 Each (£3.62 Inc' VAT at 20%)
Price: (25 to 49) £2.72 Each (£3.26 Inc' VAT at 20%)
Price: (50 to 99) £2.57 Each (£3.08 Inc' VAT at 20%)
Price: (100 to 299) £2.42 Each (£2.90 Inc' VAT at 20%)
Price: (300 to 599) £2.27 Each (£2.72 Inc' VAT at 20%)
Price: (600 or more) £2.11 Each (£2.53 Inc' VAT at 20%)
Quantity:

The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.

The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.

In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.

This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
People who bought this item also bought:
1. DP29SNGR PUSH Retaining Catch GREY (Ref: S05DP29SNGR)
2. DP3SNG PUSH Basic Release Catch GREY (Ref: S05DP3SNG)
3. C2APA99 PUSH Hinge 0mm Crank 110d Full Overlay (Ref: S05C2APA99)

For illustrative purposes only.
DP29SNGR PUSH Retaining Catch GREY
Ref: S05DP29SNGR
Price: (24 or fewer) £0.48 Each (£0.58 Inc' VAT at 20%)
Price: (25 to 49) £0.43 Each (£0.52 Inc' VAT at 20%)
Price: (50 to 99) £0.41 Each (£0.49 Inc' VAT at 20%)
Price: (100 to 299) £0.38 Each (£0.46 Inc' VAT at 20%)
Price: (300 to 599) £0.36 Each (£0.43 Inc' VAT at 20%)
Price: (600 or more) £0.34 Each (£0.41 Inc' VAT at 20%)
Quantity:

NB This catch will NOT work with standard concealed sprung cabinet hinges.
People who bought this item also bought:
1. DP4SNG PUSH Adjustable Release Catch GREY (Ref: S05DP4SNG)
2. B2S3B99B6/15 Diecast Eccent Mountplate 9mm (Ref: S05B2S3B99B6/15)
3. C2APA99 PUSH Hinge 0mm Crank 110d Full Overlay (Ref: S05C2APA99)

For illustrative purposes only.
DPMB289 PUSH Magnetic Catch Black
Ref: S05DPMB289
Price: (24 or fewer) £2.70 Each (£3.24 Inc' VAT at 20%)
Price: (25 to 49) £2.43 Each (£2.92 Inc' VAT at 20%)
Price: (50 to 99) £2.30 Each (£2.76 Inc' VAT at 20%)
Price: (100 to 249) £2.16 Each (£2.59 Inc' VAT at 20%)
Price: (250 to 499) £2.03 Each (£2.44 Inc' VAT at 20%)
Price: (500 or more) £1.89 Each (£2.27 Inc' VAT at 20%)
Quantity:

The new Salice Magnetic Push catches (DPMB289) can be mounted in either the plastic (D086SNG) or metal (D076SN9) Smove housings

Both types of Push Catch need to be fitted close to where your hand would press the door or drawer front to open it. NB This catch will NOT work with standard concealed sprung cabinet hinges.

Online Catalogue | Door Buffers and Catches