Main Pages

Our normal business hours are Monday - Friday 8am - 4.45pm, Saturday 8.30am - 11.45am

Fax: 01274 220330
Tel: 01274 200320
email: sales@sissling-group.co.uk

20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
Best Selling Products
D005SNG Smove Door Buffer Lightweight (Handle Side)
A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.

50mm x 10mm dia

For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
find out more

D045XXG/16 Plastic Spacer For Smove GREY
A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
find out more

F1C169 Sliding Door Hinge

find out more

DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.

The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.

In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.

This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more

F1PXAY Sliding Door Block

find out more

C2AFA99 Sprung Hinge 0mm Crank 165d Full Overlay
A standard sprung hinge compatible with all .

Allows a cupboard door to open 165degrees.

Mounting Plates Are NOT Included And Must Be Ordered Seperately

find out more

Online Catalogue | Smove Soft Close Hinge Adaptor System

Smove Soft Close Hinge Adaptor System
Online Catalogue | Smove Soft Close Hinge Adaptor System
Salice Smove
Salice Smove is a soft close adaptor mechanism for Salice 200 Series Hinges. It can be installed on new installations or retro-fitted to existing Salice Series 200 Hinges. It is NOT suitable for use with Series 200 PUSH-to-Open Hinges.

The Smoveholder mechanism mounts onto the hinge mounting plate by means of a special adapter. The adaptors are manufactured in 2 types, one to suit pressed steel mounting plates and the other to suit diescast mounting plates. Within each type are 3 different sizes to suit 0mm, 9mm and 17mm hinge-arm cranks.

The Smoveholder mechanisms come in three strengths - light and medium, to suit doors with two hinges and the heavy, to suit doors with 3 or more hinges.

ONLY ONE SMOVEHOLDER IS REQUIRED PER DOOR.

For illustrative purposes only.
D0S8SNG Smoveholder (Medium) for Doors with 2 Hinges
Ref: S05D0S8SNG
Price: (24 or fewer) £2.08 Each (£2.50 Inc' VAT at 20%)
Price: (25 to 49) £1.87 Each (£2.24 Inc' VAT at 20%)
Price: (50 to 99) £1.77 Each (£2.12 Inc' VAT at 20%)
Price: (100 to 299) £1.66 Each (£1.99 Inc' VAT at 20%)
Price: (300 to 599) £1.56 Each (£1.87 Inc' VAT at 20%)
Price: (600 or more) £1.46 Each (£1.75 Inc' VAT at 20%)
Quantity:

For use with doors with 2 Hinges
ONLY ONE SMOVEHOLDER IS REQUIRED PER DOOR
For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).
People who bought this item also bought:
1. DARXP9 Smove Adaptor for 17mm Crank Hinge with Diecast Mounting Plate (Ref: S05DARXP9)

For illustrative purposes only.
D0S9SNG Smoveholder (Heavy) for Doors with 3 or more Hinges
Ref: S05D0S9SNG
Price: (24 or fewer) £2.08 Each (£2.50 Inc' VAT at 20%)
Price: (25 to 49) £1.87 Each (£2.24 Inc' VAT at 20%)
Price: (50 to 99) £1.77 Each (£2.12 Inc' VAT at 20%)
Price: (100 to 299) £1.66 Each (£1.99 Inc' VAT at 20%)
Price: (300 to 599) £1.56 Each (£1.87 Inc' VAT at 20%)
Price: (600 or more) £1.46 Each (£1.75 Inc' VAT at 20%)
Quantity:

For use with doors with 3 or more Hinges
ONLY ONE SMOVEHOLDER IS REQUIRED PER DOOR
For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
D2VX09 Smove Adaptor for 0mm Crank Hinge with Pressed Steel Mounting Plate
Ref: S05D2VX09
Price: (24 or fewer) £0.44 Each (£0.53 Inc' VAT at 20%)
Price: (25 to 49) £0.40 Each (£0.48 Inc' VAT at 20%)
Price: (50 to 99) £0.37 Each (£0.44 Inc' VAT at 20%)
Price: (100 to 299) £0.35 Each (£0.42 Inc' VAT at 20%)
Price: (300 to 599) £0.33 Each (£0.40 Inc' VAT at 20%)
Price: (600 or more) £0.31 Each (£0.37 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 0mm cranked Hinge (full overlay) when fitted to a pressed steel mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
D2VX99 Smove Adaptor for 9mm Crank Hinge with Pressed Steel Mounting Plate
Ref: S05D2VX99
Price: (24 or fewer) £0.76 Each (£0.91 Inc' VAT at 20%)
Price: (25 to 49) £0.68 Each (£0.82 Inc' VAT at 20%)
Price: (50 to 99) £0.65 Each (£0.78 Inc' VAT at 20%)
Price: (100 to 299) £0.61 Each (£0.73 Inc' VAT at 20%)
Price: (300 to 599) £0.57 Each (£0.68 Inc' VAT at 20%)
Price: (600 or more) £0.53 Each (£0.64 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 9mm cranked Hinge (half overlay) when fitted to a pressed steel mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
D2VXP9 Smove Adaptor for 17mm Crank Hinge with Pressed Steel Mounting Plate
Ref: S05D2VXP9
Price: (24 or fewer) £1.06 Each (£1.27 Inc' VAT at 20%)
Price: (25 to 49) £0.95 Each (£1.14 Inc' VAT at 20%)
Price: (50 to 99) £0.90 Each (£1.08 Inc' VAT at 20%)
Price: (100 to 299) £0.85 Each (£1.02 Inc' VAT at 20%)
Price: (300 to 599) £0.80 Each (£0.96 Inc' VAT at 20%)
Price: (600 or more) £0.74 Each (£0.89 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 17mm cranked Hinge (inset) when fitted to a pressed steel mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
DARX09 Smove Adaptor for 0mm Crank Hinge with Diecast Mounting Plate
Ref: S05DARX09
Price: (24 or fewer) £0.44 Each (£0.53 Inc' VAT at 20%)
Price: (25 to 49) £0.40 Each (£0.48 Inc' VAT at 20%)
Price: (50 to 99) £0.37 Each (£0.44 Inc' VAT at 20%)
Price: (100 to 299) £0.35 Each (£0.42 Inc' VAT at 20%)
Price: (300 to 599) £0.33 Each (£0.40 Inc' VAT at 20%)
Price: (600 or more) £0.31 Each (£0.37 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 0mm cranked Hinge (full overlay) when fitted to a Diecast mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
DARX99 Smove Adaptor for 9mm Crank Hinge with Diecast Mounting Plate
Ref: S05DARX99
Price: (24 or fewer) £0.76 Each (£0.91 Inc' VAT at 20%)
Price: (25 to 49) £0.68 Each (£0.82 Inc' VAT at 20%)
Price: (50 to 99) £0.65 Each (£0.78 Inc' VAT at 20%)
Price: (100 to 299) £0.61 Each (£0.73 Inc' VAT at 20%)
Price: (300 to 599) £0.57 Each (£0.68 Inc' VAT at 20%)
Price: (600 or more) £0.53 Each (£0.64 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 9mm cranked Hinge (half overlay) when fitted to a Diecast mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).

For illustrative purposes only.
DARXP9 Smove Adaptor for 17mm Crank Hinge with Diecast Mounting Plate
Ref: S05DARXP9
Price: (24 or fewer) £1.06 Each (£1.27 Inc' VAT at 20%)
Price: (25 to 49) £0.95 Each (£1.14 Inc' VAT at 20%)
Price: (50 to 99) £0.90 Each (£1.08 Inc' VAT at 20%)
Price: (100 to 299) £0.85 Each (£1.02 Inc' VAT at 20%)
Price: (300 to 599) £0.80 Each (£0.96 Inc' VAT at 20%)
Price: (600 or more) £0.74 Each (£0.89 Inc' VAT at 20%)
Quantity:

Use this adaptor for a 17mm cranked Hinge (inset) when fitted to a Diecast mounting plate.

For Use all Hinges in the section Series 200 Cabinet Hinges (NOT Push-to Open).
People who bought this item also bought:
1. D0S8SNG Smoveholder (Medium) for Doors with 2 Hinges (Ref: S05D0S8SNG)
Online Catalogue | Smove Soft Close Hinge Adaptor System