Please note all orders are now charged the increased VAT rate of 17.5%.

Our normal business hours are Monday - Friday 8am - 4.45pm, Saturday 8.30am - 11.45am

Main Pages

Fingertip Direct for all your cabinet handles, knobs and pulls

Best Selling Products

DPMB289 PUSH Magnetic Catch Black

DPMB289 PUSH Magnetic Catch Black

The new Salice Magnetic Push catches (DPMB289) can be mounted in either the plastic (D086SNG) or metal (D076SN9) Smove housings

Both types of Push Catch need to be fitted close to where your hand would press the door or drawer front to open it. NB This catch will NOT work with standard concealed sprung cabinet hinges.


find out more

 

DP4SNG PUSH Adjustable Release Catch GREY

DP4SNG PUSH Adjustable Release Catch GREY

The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.

The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.

In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.

This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more

 

DP29SNGR PUSH Retaining Catch GREY

DP29SNGR PUSH Retaining Catch GREY

NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more

 

D076SN9 Smove Housing - Diecast Metal

D076SN9 Smove Housing - Diecast Metal

Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
find out more

 

BAV3L09F Clip-On Steel Mount Plate 0mm

BAV3L09F Clip-On Steel Mount Plate 0mm

 

C2APA99 PUSH Hinge 0mm Crank 110d (Full)

C2APA99 PUSH Hinge 0mm Crank 110d (Full)

A push to open sprung hinge compatible with all .
Allows a cupboard door to open 110degrees.

These hinges MUST be used in conjunction with a suitable touch-release type cupboard catch, links below.

Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more

 

Salice 700 Series Soft Close Cabinet Hinges

Series 700: Fully integrated decelerating closing action.

Salice Series 700 soft close cabinet hinge

Salice Series 700 Cabinet Hinges are compatible with pressed steel or die cast Series 200 mounting plates as well as the snap on DOMI® mounting plates.

Salice Silentia, the hinge with fully integrated decelerating closing action is technically revolutionary and aesthetically leading edge.

Silentia provides real solutions to those furniture producers who need to confer quality on their products by means of range completeness.

Use the links below to view 700 Series Salice Cabinet Soft Close Hinges


SSL