DPMB289 PUSH Magnetic Catch Black
The new Salice Magnetic Push catches (DPMB289) can be mounted in either the plastic (D086SNG) or metal (D076SN9) Smove housings
Both types of Push Catch need to be fitted close to where your hand would press the door or drawer front to open it. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.
The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.
In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.
This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
DP29SNGR PUSH Retaining Catch GREY
NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
D076SN9 Smove Housing - Diecast Metal
Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
find out more
C2APA99 PUSH Hinge 0mm Crank 110d (Full)
A push to open sprung hinge compatible with all .
Allows a cupboard door to open 110degrees.
These hinges MUST be used in conjunction with a suitable touch-release type cupboard catch, links below.
Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more
 Adar Concealed Drawer SlidesAdar concealed drawer slides enhance any drawer feature through elegant and silent action whilst at the same time being completely hidden from view. |
 Adar Futura Soft Close Drawer SlidesAdar Smove: Fully integrated into the drawer runner, decelerates the closing action of the drawer. |
 Adar Futura Push To Open Drawer SlidesAdar Push: The new opening system for handle-less drawers is fully integrated in the drawer runner. A slight pressure of the drawer front is all that is required for the drawer to self open |
 Adar A208R Standard Drawer SlidesStandard drawer runners, designed to mount on the outer face of the drawer box. Mechanism is designed to close the drawer automatically over the last 30mm of travel. |
 Adar Integrated Metal Side Drawer SlidesEasy to disassemble drawer runners that form the drawer box sides, offering lateral stability, self closing and front adjustment. |
 Full extension ball bearing slide KA5632
View All Full Extension Ball Bearing Drawer Slides |
 Single Extension Ball Bearing Drawer Runners For 17mm Grooves- Suitable for 17 mm grooved drawers |
