email: sales@sissling-group.co.uk
20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
D005SNG Smove Door Buffer Lightweight (Handle Side)
A soft close door buffer, the Smove D005 is inserted into the cabinet side opposite the hinges.
For optimal performance Salice recommend that the buffer is located in the center of the side panel.
50mm x 10mm dia
For wood based and alu-framed doors over 1600mm height it may be necessary to insert two Smove, one in the upper part of the door and one in the lowerpart. Opposite the hinges.
find out more
D045XXG/16 Plastic Spacer For Smove GREY
A 20mm high plastic spacer block to enable part D076SN9 Diecast Smove Housing to be utilised on Face Frame cabinets.
find out more
DP4SNG PUSH Adjustable Release Catch GREY
The adjustable Push consists of a release device and a screw-fixed adapter which have been developed to improve the locating action of the system.
The adjustable Push has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter.
In addition, the adapter had a sideways adjustment facility of +/-2mm. This is achieved by loosening two screws and adjusting the position of the adapter using the elongated holes.
This item is used in conjunction with DP29SNGR shown below. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
C2AFA99 Sprung Hinge 0mm Crank 165d Full Overlay
A standard sprung hinge compatible with all .
Allows a cupboard door to open 165degrees.
Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more
Salice 900 Series Economy Cabinet HingesSeries 900: High quality at an affordable price.  Salice Series 900 Cabinet Hinges are compatible with pressed steel or die cast Series 200 mounting plates. The 900 Series Hinge has a depth adjustment range of +2.5mm when 200 series hinge mounting plates are used and an adjustment range from -1.5 to +4mm which makes them ideally suited to retrofitting where the extra adjustment can be most effective. Series 900 hinges can be used on a wide variety of doors, the 94° opening hinge will acommodate doors upto 32mm thick and with special profiles, the 110° hinge can also be used on doors as light as 13mm thick. Use the links below to view 900 Series Salice Cabinet Mini Hinges |
