email: sales@sissling-group.co.uk
20 Fitzwilliam Steet
Bradford
West Yorkshire
BD4 7BL
United Kingdom
S2BX83H9 Symmetrical Steel Screw Cover
Hides the hinge screw and gives projects a neatly finished impression.
find out more
DPMB289 PUSH Magnetic Catch Black
The new Salice Magnetic Push catches (DPMB289) can be mounted in either the plastic (D086SNG) or metal (D076SN9) Smove housings
Both types of Push Catch need to be fitted close to where your hand would press the door or drawer front to open it. NB This catch will NOT work with standard concealed sprung cabinet hinges.
find out more
C2APA99 PUSH Hinge 0mm Crank 110d (Full)
A push to open sprung hinge compatible with all .
Allows a cupboard door to open 110degrees.
These hinges MUST be used in conjunction with a suitable touch-release type cupboard catch, links below.
Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more
D076SN9 Smove Housing - Diecast Metal
Adapter for the Smove door buffers, eliminates the need to drill the cabinet so easily installed as a cabinet upgrade. Fixed with double sided tape (supplied) but can be further fixed with supplied screw.
find out more
C2AYA99 Corner Cabinet Hinge 70deg
A sprung cabinet hinge for doors with a positive 90 degree angle.
11mm deep die cast cup, 35mm diameter.
11mm deep metal cup.
70 degree opening.
Compatible with all
Quantity Discounts Apply - Mounting Plates Are NOT Included And Must Be Ordered Seperately
find out more
Salice 200 Series Push to Open Cabinet HingesThe PUSH-System is a self opening system for the doors of all types of handleless cabinet furniture.  It consistes of a series of self-opening hinges, release devices (the PUSH) that can be fitted to the top, base or side panel of the cabinet, and retaining catches to be fitted to the back of the door. The PUSH release device is available in a mechanical version that is fitted to the cabinet side using screws or adhesive strip, and a magnetic version that can be mounted using a holder or recessed into the edge of the cabinet. The retaining catches can be pressure-fixed, screw-fixed or fitted with adhesive strip. For doors over 1600mm in height the use of two release devices is recommended.
The adjustable PUSH consists of a release device and a screw fixed adapter which have been developed to improve the locating action of the system. The adjustable PUSH has a depth adjustment facility with a range of -1mm to +2.5mm which is controlled by a small adjuster wheel located at the back of the adapter. In addition the adapter has a leteral adjustment facility of +/-2mm. This is achieved by loosening the two fixing screws and adjusting the position of the adapter using the elongated holes. Use the links below to view 200 Series Salice Cabinet Hinges |
Adjustable PUSH - Techinical Information